![]()
| Burst VMF-2 Two Channel Mixer/Fader with Fade to Black
The VMF-2 is a 2 channel mixer/fader. It will fade from A to B, B to A or A to Black. There is an auto mode that allows the transition to be preset from 0.2 seconds (approx. 6 Frames) to 6 seconds. The transition occurs upon hitting the TAKE button or a GPI trigger. In the A to B mode, the sources must be genlocked. In the A to Black mode, no B input is required. The output is dc clamped to zero Volts. The VMF-2 is 12 Vdc powered, wall module included. - Input/Output: 1 Volt standard video
- Input Impedance: HiZ or 75 Ohms 1%, looping (jumper/switch selected)
- Output Impedance: 75 Ohms 1%
- Video Connector: BNC, 4 pin MiniDIN for Y/C input
- GPI Trigger: Contact closure initiates action
- Output Protection: Open or Short, infinite duration
- Black Output: Sync, Color Burst and 7.5 IRE setup (0 IRE PAL)
- Bandwidth: 10 MHz @ 0.5 dB
- Diff Gain: 0.1%
- Diff Phase: 0.1 deg
- S/N: 60 dB
- Crosstalk: 60 dB
- Size (Head End): 4.1 W x 5.5 D x 1.5 H inches
- Size (RCU): 2.5 W x 6.0 D x 1.8 H inches
|
